HOBBYWING COMBO-XRotor-Micro-60A-4in1 ESC&FC(BL32/F7) [38040304] セキドオンラインストア DJI ドローン|PGYTECH SUBLUE HOBBYWING 総代理店

ゲスト 様

HOBBYWING COMBO-XRotor-Micro-60A-4in1 ESC&FC(BL32/F7)

※写真はイメージです。

型番 38040304
定価 14,000円(税込15,400円)
販売価格 11,200円(税込12,320円)

3080円 OFF!

商品ポイント 123 ポイント
在庫状況 完売/入荷待ち

申し訳ございません
この商品は好評につき品切れ中です


Super hardware and running speed

Equipped with STM32F722 MCU which has powerful computing ability and fast running speed, and high sensitivity ICM20602 six-axis motion sensor. It can perfectly support bidirectional DShot digital throttle communication. The integrated OSD chip can adjust and set each OSD parameters in FC parameter adjustment software and radio, which is simple and convenient. On-board large capacity Flash memory chip can record and store more flight logs, which is convenient for users to debug aircraft based on flight data.

Super hardware and running speed

Special interface for DJI image transmission system

With DJI image transmission system port, equipped with corresponding flat cable (FC has been equipped), can avoid welding, realize plug and play.

Special interface for DJI image transmission system

On-board 5V & 12V dual BEC circuit

FMU integrates with 12V BEC circuit. It can supply super power output for image transmission and 12V LED devices.

On-board 5V & 12V dual BEC circuit

On-board Pit Switch module

FC integrated Pit Switch module can open or close VTx by radio after being adjusted on FC parameter software. Easy and convenient.

On-board Pit Switch module

Perfectly support firmware of various FPV

It support the firmware of BetaFlight , Cleanflight , Butterflight , inva and other
mainstream FPV, and can use corresponding parameter adjustment software to adjust
various parameters, making the FC more suitable for various FPV flight and race.

Perfectly support firmware of various FPV

Unique installation design and shock absorption structure

The double hole distance mounting hole design (30 * 30MM & 20 * 20MM)
can adapt to different frames. The unique flexible flat cable connection mode
(The effect is better with hobbywing tower 4in1 ESC ), and the shock
absorption mechanism of installation hole, can effectively reduce the
impact of external vibration on FC high-sensitivity components,
and make the flight more stable and accurate.

Unique installation design and shock
absorption structure

Perfectly match with Hobbywing ESC

Match with Hobbywing tower 4in1 ESC, easy to install and wire. The appearance is more beautiful.

Perfectly match with Hobbywing ESC

Highly Integrated

With a similar size of a FC, the 4IN1 ESC includes 4 high performance 60A BLHeli_32 DShot1200 ESCs, a 5V BEC which can provide power for devices (i.e. FC), and a voltmeter which allows FC to monitor the
amp & volt in real time. Two ways for connecting the ESC to a FC: 1) connecting via soft cables, 2)
soldering via solder tabs are provided for selection. And the shock-absorbing design of mounting holes
effectively reduces the external vibration’s impact on high-sensitivity components and provides great
shock-absorbing protection to upper devices (i.e. FC). This ESC is designed for FPV racing.

Highly Integrated

High Quality Hardware

Large-size MOSFETs imported from Japan make the 4IN1 ESC have greater voltage/current endurance
than the last generation (at high voltages). The use of high performance 32-bit microprocessors with
operating frequency of up to 48MHz, 3-in-1 drive ICs, imported high quality ceramic capacitors,
3-ounce copper, 6 layers of PCBs guarantees less heat, higher efficiency and rapider response.

High Quality Hardware

BLHeli-32 Firmware Ready

The ESC flashed with the 3rd-generation BLHeli-32 firmware has great
performance & rich functions and supports adjusting parameters or upgrading
firmware via different ways (i.e. via throttle signal wire with using other
development board or a FC flashed with the Cleanfight/Betaflight firmware).

BLHeli-32 Firmware Ready

DShot1200 Ready !

Besides the regular PWM mode, Oneshot125/Oneshot42/Multishot
modes, DShot150/300/600 modes, the latest DShot1200 mode is
also supported. In DShot1200 mode, the ESC has great
anti-interference performance and rapid response.

DShot1200 Ready !

Hardware Generated PWM & Damped Light Mode

The ESC firmware uses hardware generated motor pwm for smooth throttle response and silent operation. Damped light
does regenerative breaking, causing very fast motor retardation, and it inherently also does active freewheeling.

Hardware Generated PWM & Damped Light Mode

【 スペック 】

XRotor F7 Convertible Flight Controller

Basic Features

Compatible with (Multirotors) Quadcopters
Firmware HOBBYWING_XROTORF7CONV
FC Programming Supported
Programming via Betaflight/Cleanflight-configurator
Compatible with (Modes) PWM、Oneshot125、Oneshot42、Multishot、 Dshot150、Dshot300、Dshot600、PROSHOT1000
Compatible with (Transmitters) PPM、Spektrum、SBUS、SUMD、SUMH、 XBUS、IBUS、JETIEXBUS、CRSF、SRXL
OSD Built-in
Voltage Monitoring Supported
Current Monitoring Supported
External Buzzer Supported
LED Control Supported
BEC 5V @ 1.5A ; 10V @ 1.5A
USB Port MicroUSB

Size & Weight

Size 32x32 mm
Weight 3.3 g

XRotor Micro 60A 4in1 BLHeli-32 DShot1200

Specifications

Cont./Peak Current 60Ax4/ 80Ax4
Input Voltage 3-6S Lipo
BEC output 5V & 0.6A

Wires & Connectors

Input Wires Red-12AWG-130mm/ Black-12AWG-130mm
Output Wires No wires but solder tabs
Input Connectors XT60(w/ Wires Soldered on)
Output Connectors No
(Note: All the wire length above is the original length not the length you see from the outside.)

Features

Firmware Hobbywing_XRotor_BLHeli-32 Firmware
ESC Programming BLHeliSuite32
Stick Programming Supported
DEO Supported
Throttle Range Calibration Supported
Oneshot125 Mode Supported
Oneshot42 Mode Supported
MultiShot Mode Supported
DShot150/300/600/1200 Supported
Timing Supported
Motor Rotation Supported

Size & Weight

Size 52x42x6.6mm
Weight 15g
Applications 130-300mm FPVs

【セット内容】

HOBBYWING XRotor Micro 60A 4in1 BLHeli-32 DShot1200 × 1
HOBBYWING XRotor F7 Convertible Flight Controller × 1

《HOBBYWINGならSEKIDO》
SEKIDOではHOBBYWING社の日本国内におけるパートナーとして手を組み
ユーザー様にご満足を頂けるお値段・サービスをご提供させて頂いております。

アフターサービスプログラム(製品保証)はこちらをご覧ください。


配送日につきまして


* こちら商品は、祝日の出荷対象外の商品となります。祝日にご注文いただいた分は翌平日営業日の出荷となります。

* 通常商品とご一緒にご注文いただいた場合、翌平日営業日にまとめての出荷となります。

新商品や役立つコンテンツ、キャンペーン情報が届く!メルマガ登録

開始まであと

【事前告知】
11/22よりキャンペーン開始予定!

このページの先頭へ