HOBBYWING XRotor F7 Convertible Flight Controller [31003002] セキドオンラインストア DJI ドローン|PGYTECH SUBLUE HOBBYWING 総代理店

ゲスト 様

HOBBYWING XRotor F7 Convertible Flight Controller

※写真はイメージです。

型番 31003002
定価 5,250円(税込5,775円)
販売価格 4,200円(税込4,620円)

1155円 OFF!

商品ポイント 46 ポイント
購入数
セット


Super hardware and running speed

Equipped with STM32F722 MCU which has powerful computing ability and fast running speed, and high sensitivity ICM20602 six-axis motion sensor. It can perfectly support bidirectional DShot digital throttle communication. The integrated OSD chip can adjust and set each OSD parameters in FC parameter adjustment software and radio, which is simple and convenient. On-board large capacity Flash memory chip can record and store more flight logs, which is convenient for users to debug aircraft based on flight data.

Super hardware and running speed

Special interface for DJI image transmission system

With DJI image transmission system port, equipped with corresponding flat cable (FC has been equipped), can avoid welding, realize plug and play.

Special interface for DJI image transmission system

On-board 5V & 12V dual BEC circuit

FMU integrates with 12V BEC circuit. It can supply super power output for image transmission and 12V LED devices.

On-board 5V & 12V dual BEC circuit

On-board Pit Switch module

FC integrated Pit Switch module can open or close VTx by radio after being adjusted on FC parameter software. Easy and convenient.

On-board Pit Switch module

Perfectly support firmware of various FPV

It support the firmware of BetaFlight , Cleanflight , Butterflight , inva and other mainstream FPV, and can use corresponding parameter adjustment software to adjust various parameters, making the FC more suitable for various FPV flight and race.

On-board Pit Switch module

Unique installation design and shock absorption structure

The double hole distance mounting hole design (30 * 30MM & 20 * 20MM) can adapt to different frames. The unique flexible flat cable connection mode (The effect is better with hobbywing tower 4in1 ESC ), and the shock absorption mechanism of installation hole, can effectively reduce the impact of external vibration on FC high-sensitivity components, and make the flight more stable and accurate.

Perfectly support firmware of various FPV

Perfectly match with Hobbywing ESC

Match with Hobbywing tower 4in1 ESC, easy to install and wire. The appearance is more beautiful.

Perfectly support firmware of various FPV

【HOBBYWING XRotor F7 Convertible Flight Controller スペック】

Basic Features

Compatible with (Multirotors) Quadcopters
Firmware HOBBYWING_XROTORF7CONV
FC Programming Supported
Programming via Betaflight/Cleanflight-configurator
Compatible with (Modes) PWM、Oneshot125、Oneshot42、Multishot、 Dshot150、Dshot300、Dshot600、PROSHOT1000
Compatible with (Transmitters) PPM、Spektrum、SBUS、SUMD、SUMH、 XBUS、IBUS、JETIEXBUS、CRSF、SRXL
OSD Built-in
Voltage Monitoring Supported
Current Monitoring Supported
External Buzzer Supported
LED Control Supported
BEC 5V @ 1.5A ; 10V @ 1.5A
USB Port MicroUSB

Size & Weight

Size 32x32 mm
Weight 3.3 g

【セット内容】

HOBBYWING XRotor F7 Convertible Flight Controller × 1

《HOBBYWINGならSEKIDO》
SEKIDOではHOBBYWING社の日本国内におけるパートナーとして手を組み
ユーザー様にご満足を頂けるお値段・サービスをご提供させて頂いております。

アフターサービスプログラム(製品保証)はこちらをご覧ください。


配送日につきまして


* こちら商品は、祝日の出荷対象外の商品となります。祝日にご注文いただいた分は翌平日営業日の出荷となります。

* 通常商品とご一緒にご注文いただいた場合、翌平日営業日にまとめての出荷となります。

新商品や役立つコンテンツ、キャンペーン情報が届く!メルマガ登録

開始まであと

【事前告知】
11/22よりキャンペーン開始予定!

このページの先頭へ