BlueRobotics BlueROV2用 Low-Light HD USB Camera

※写真はイメージです。

型番	B190617030
販売価格	12,727円(税込14,000円)
商品ポイント	140 ポイント
在庫状況	残り 1 セット売切れ間近

購入数: セット

» 特定商取引法に基づく表記 (返品など)
» この商品を友人に教える
» お問い合わせはこちら
購入履歴のあるSEKIDO会員のみ
レビューの投稿が可能です。

対応機種：BlueRobotics BlueROV2

【商品説明】

This Low-Light HD USB Camera is ideally suited to use underwater with excellent low-light performance, good color handling, and onboard video compression. A specially-chosen wide-angle, low distortion lens provides excellent picture quality on the ROV.

Based on the Sony IMX322 sensor, this camera uses a large sensor (1/2.9″) and a relatively low pixel count (2MP, 1080p), meaning that the physical pixel size is large to allow maximum light sensitivity. We’ve had this camera down at 300m depth, where we could see subtle bioluminescent creatures in the darkness!

Bioluminescent invertebrates at 120m in California

The camera also has an onboard H.264 compression chip so that all of the video compression is done onboard and doesn’t place much load on the main computer. That also means that we’ll be able to support multiple cameras in the future for alternate views.

This camera is fully supported in ArduSub. Includes an 8″ USB cable with JST-PH connector.

The camera’s PCB is 32 x 32mm and works well with our Camera Tilt System.

【商品サイズ】

【スペック】

Physical
Camera PCB Dimensions	32mm x 32mm
Mounting Hole Spacing	28mm x 28mm
Connector	JST-PH to USB
Performance
Field of View (Horizontal)	80°
Field of View (Vertical)	64°
Focal Length	2.97 mm
Format	1/2.9"
Distortion	1%
Resolution	2.24 MP
Standard	1080p
Compression format	H.264 /MJPEG / YUV2 (YUYV)
Working Temperature	-20 - 75°C
Minimum Illumination	0.01 lux
Sensitivity	5.0V/lux-sec@550nm
Electrical
Supply Voltage	5 volts
Max Power Draw	220mA